Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
13.
MAiNTENANCE iNSTRUCTiONS
13.1
After use and before performing maintenance, unplug and
disconnect the battery charger (see sections 6, 7 and 8).
13.2
Use a dry cloth to wipe all battery corrosion and other dirt or oil
from the battery terminals, cords, and the charger case.
13.3
Ensure that all of the charger components are in place and in
good working condition.
13.4
Servicing does not require opening the unit, as there are no user-
serviceable parts.
13.5
All other servicing should be performed by qualified service
personnel.
14.
MOViNG ANd STORAGE iNSTRUCTiONS
14.1
Store the charger unplugged. The cord will still conduct electricity
until it is unplugged from the outlet.
14.2
Store inside, in a cool, dry place.
14.3
Do not store the ring terminals, on or around metal, or clipped
to cables.
14.4
If the charger is moved around the shop or transported to another
location, take care to avoid/prevent damage to the cords, ring
terminals and charger. Failure to do so could result in personal
injury or property damage.
15.
TROUBLESHOOTiNG
PROBLEM
Battery ring terminals
do not spark when
touched together.
POSSiBLE CAUSE
The charger is
equipped with an
auto-start feature.
It will not supply
current to the battery
ring terminals until
a battery is properly
connected. Meaning,
the ring terminals will
not spark if touched
together.
• 11 •
REASON/SOLUTiON
No problem; this is a
normal condition.
Publicité
Table des Matières
