Technical Specifications - CTEK MUS 4.3 TEST&CHARGE Manuel

TECHNICAL SPECIFICATIONS

Model number
Rated Voltage AC
Charging voltage
Min battery voltage
Charging current
Current, mains
Back current drain*
Ripple**
Ambient temperature
Charger type
Battery types
Battery capacity
CEC-400 Battery capacity
Dimensions
Insulation class
Weight
*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers has a very
low back current.
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which
has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery.
CTEK battery chargers produce very clean voltage and current with low ripple.
16 • EN
20018888_C.indd 14
1077
110–120VAC, 50–60Hz
14.4V, 14.7V,
2.0V
4.3A max
1.1A (at full charging current)
rms
<1Ah/month
<4%
-4 °F à +122 °F (-20 ˚C à +50 ˚C), output power is reduced automatically at high temperatures
Eight step, fully automatic charging cycle
All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)
1.2–110Ah up to 160Ah for maintenance
27–95Ah
6½ x 2½ x 1½ inches (L x W x H)
IP65
1.4 Ibs
15.8V
2017-05-24 13:20:45