Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TECHNICAL SPECIFICATIONS
Model number
1065
Rated Voltage AC
110–120VAC, 50–60Hz
Charging voltage
Min battery voltage
2.0V
Charging current
4.3A
Current, mains
1.1A rms (at full charging current)
Back current drain*
<1Ah/month
Ripple**
<4% of rated current
Ambient temperature -4°F to +122°F (-20˚C to +50˚C), output power is reduced automatically at high temperatures
Charger type
Eight step, fully automatic charging cycle
Battery types
All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)
Battery capacity
1.2–110Ah, up to 160Ah for maintenance
Dimensions
6½ x 2½ x 1½ inches (L x W x H)
Weight
1.4 Ibs
*) Back current drain is the current that drains the battery if the charger is not connected to the mains. The battery charger
model 1065 has a very low back current.
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which
has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery.
The battery charger model 1065 produce very clean voltage and current with low ripple.
12 • EN
14.4V,
14.7V,
15.8V
Publicité
Table des Matières
