Flashing Light - CTEK MUS 4.3 TEST&CHARGE Manuel

ERROR LAMP
If the error lamp is lit, check the following:
1. Is the chargers positive lead connected
to the battery´s positive pole?
2. Is the charger connected to a 12V
battery?
3. Has charging been interrupted in
STEP 1, 2 or 5?
Restart the charger by pressing the MODE-
button. If charging is still being interrupted, the
battery...
STEP 1: ...is seriously sulphated and may need
to be replaced.
STEP 2: ...cannot accept charge and may need
to be replaced.
STEP 5: ...cannot keep charge and may need to
be replaced.
20018888_C.indd 11
POWER LAMP
If the power lamp is lit with a:
1. STEADY LIGHT
The mains cable is connected to the wall socket.

2. FLASHING LIGHT:

The charger has entered the energy save mode. This
happens if the charger isn´t connected to the battery
in 2 minutes.
EN • 13
2017-05-24 13:20:44