Main Features - Spypoint IR-6 Manuel De L'utilisateur

Masquer les pouces Voir aussi pour IR-6:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAIN FEATUrES

LCD display mode: date, time and number of pictures.
Adjustable PIR sensitivity.
Color pictures during day; black and white at night.
Multi-shot pictures (up to 4 per detection).
Video length adjustable from 10 to 90 seconds.
Adjustable delay between motions from 1 to 15 minutes.
Night-time photos and videos taken with 46 LED.
Removable internal camera for easier handling.
Water resistant housing case.
Automatic print of date, time, temperature and moon
phase on every picture.
Auxiliary power jack for external 12 volt DC input.
Optional use of a solar panel SP12-V to recharge lithium
battery pack LIT-C-8 (optional)
POWEr
This camera offers the possibility to use rechargeable lithium
battery that can be recharged using the solar panel SP-12V
(optional). During installation of rechargeable lithium battery,
slide up the switch inside the battery case up to activate the
charging system with the solar panel. For all other uses, slide
the switch down.
Alkaline batteries
This camera requires the use of 6 AA batteries (1.5V). The
use of alkaline batteries is strongly recommended. Also note
that the voltage of rechargeable AA batteries (1.2V) is
insufficient to power your SPYPOINT camera. Insert the
batteries as indicated inside the battery case. Exact polarity
must be followed. During installation of alkaline batteries,
place the switch inside the battery case to « Alkaline ». The
battery level is shown on the LCD screen. When the batteries
are half full
the camera continues to take pictures
recommend changing the batteries before they are
(See figure below)
but we strongly
.
empty
23

Publicité

Table des Matières
loading

Table des Matières