Troubleshooting - Janome TB-12 Livret D'instructions

Troubleshooting

Condition
The needle thread
breaks.
The bobbin thread
breaks.
The needle breaks.
Skipped stitches
Seam puckering
The cloth is not
feeding smoothly.
The machine doesn't
work.
Patterns are
distorted.
Noisy operation
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is incorrectly inserted.
5. The needle thread and the bobbin thread are not set properly
under the presser foot at the beginning of sewing.
6. The fabric is not drawn to the rear when the sewing has
finished.
7. The thread is too heavy or too fine for the needle.
1. The bobbin thread is not threaded properly in the bobbin
case and shuttle.
2. Lint has collected in the shuttle area.
3. The bobbin is damaged and doesn't turn smoothly.
1. The needle is incorrectly inserted.
2. The needle is bent or blunt.
3. The needle clamp screw is loose.
4. The needle thread tension is too tight.
5. The fabric is not drawn to the rear when the sewing has
finished.
6. The needle is too fine for the fabric being sewn.
1. The needle is incorrectly inserted.
2. The needle is bent or blunt.
3. The needle and/or threads are not suitable for the work being
sewn.
4. A blue needle is not being used for sewing stretch, very fine
fabrics and synthetics.
5. The needle thread is not threaded properly.
6. The wrong needle is being used.
1. The needle thread tension is too tight.
2. The needle thread is not threaded properly.
3. The needle is too heavy for the fabric being sewn.
4. The stitch length is too long for the fabric.
1. The feed dog is packed with lint.
2. The stitches are too fine.
3. The feed dog is not raised after "drop feed" sewing.
1. The machine is not plugged in.
2. A thread is caught in the shuttle race.
3. The clutch is disengaged.
1. The stitch is not balanced.
1. There is thread caught in the hook race.
2. Lint has built up in the shuttle or the shuttle race.
Cause
58
Reference
Page 20
Pages 22, 24
Page 12
Page 12
Page 20
Page 28
Page 12
Page 18
Page 54
Change the bobbin
Page 12
Page 12
Page 12
Pages 22, 24
Page 28
Page 12
Page 12
Page 12
Page 12
Page 12
Page 20
Change the needle
Pages 22, 24
Page 20
Page 12
Make stitch denser
Page 52
Make stitch coarser
Page 10
Page 6
Page 54
Page 16
Page 26
Page 54
Page 54