Publicité
Les langues disponibles
Les langues disponibles
37
ELECTRODES – CHOKE
After removing the cover, detach the high-tension cables from the transformer side, remove the photo resist-
ance, unscrew the connector that hooks the fuel line to the choke, loosen the screws of the overhead plate and
remove it with the flange-choke-deflector-electrode assembly.
Remove the screws 5, in order to remove the deflector, and the screws 6 to remove the electrodes. The choke
may be cleaned adequately by removing the filter and cleaning inside the spray nozzle and jet with gasoline
and a light oil rinse. Re-assemble all parts carefully with special attention to the positioning of the electrodes-
deflector.
6
5
Publicité
Chapitres
