Electrical Connections - Lamborghini Caloreclima ECO 50/2 Notice D'installation Et D'entretien

ELECTRICAL CONNECTIONS

The connections to be made by the installer are as follows:
Electrical supply line
Thermostat line
Warning light (optional)
Timer (optional)
Flame control thermostat (optional)
Eliminate any cable bridges
N.B. It is necessary to observe scrupulously normal working practices that indicate attachment of no more
than two cables per terminal.
Warning:
Do not exchange the neutral with the phase
Be sure to make a good connection for the ground wire
Respect normal working practices and observe scrupulously local regulations in force
LEGEND
BRM Motor Relay Spool
CRT Thermal Relay Contact
Fuse
F
FA Matched Filter
FR Photo Resistance
IG Main Switch
Ima On/Off Switch
ImM Min./Max Switch
Burner Motor
MB
MMS Air Intake Control, Motor Reducer Clamp
MPE Morset. Apparec. Landis LOA-LMO 44
Motor Relay
RM
RT Thermal Relay
TMF 2° Flame Modulation Thermostat (optional)
TP Timer
TR Transformer
Back-up Thermostat
TS
VE1 1° Flame Electromagnetic Valve
VE2 2° Flame Electromagnetic Valve
28