ELECTRODES - DIFFUSER ADJUSTMENT
Model
PG 180/2
PG 250/2
PG 300/2
There are 2 ignition electraodes. To adjust these, observe the illustration above and follow the instructions.
NOTE: The ignition electrodes must not touch the diffuser or the draught tube for any reason. Otherwise,
they would not work properly and burner operation would be affected.
NOTE: To prevent damaging the combustion head adjustment parts, after removing the
diffuser we advise using a spanner/fox wedge for fitting and removing the nozzle.
A
15 ÷ 17
8 ÷ 9
15 ÷ 17
8 ÷ 9
15 ÷ 17
8 ÷ 9
B
C
0 ÷ 1
0 ÷ 1
0 ÷ 1
21
D
4 ÷ 5
4 ÷ 5
4 ÷ 5