Languages; Language Selection; Figure 9 Jumper Locations For 3-Wire And 2-Wire Connections - Fluke 914 Serie Guide De L'utilisateur

914X Field Metrology Wells

Languages

Figure 9 Jumper locations for 3-wire and 2-wire connections

Thermocouple (TC) Connector (4)
The TC connector allows for the use of subminiature TC connectors (see CE Comments on
page 8 for information on using clamp-on ferrites).
Fuse (5)
Fuse for the 4-20 mA circuit. Always replace with a fuse of the appropriate rating (see Section
2.1 Specifications on page 13).
3.3 Languages
The display on Field Metrology Wells can be set to different languages depending on the
configuration.
European: English, French, Spanish, Italian, German
●
Russian: Russian, English
●
Asian: English, Chinese, Japanese
●
3.3.1

Language Selection

Select the language to be displayed by following the steps shown in Figure 10 on opposite
page.
26