Cleaning The Housing; Cleaning The Air Suction Grill; Storage; Troubleshooting - SilverCrest SHAC 2100 A1 Mode D'emploi

Cleaning the housing

■ Use a soft cloth lightly moistened with a mild soap solution to clean the housing
and attachments.

Cleaning the air suction grill

► Clean the air intake grill
4) Turn the air intake grill
from the hair dryer.
5) Clean the openings of the air intake grill
6) Push the air intake grille
air intake grille
air intake grille
tightly.

Storage

CAUTION - PROPERTY DAMAGE!
► First pack and transport the hair dryer when it has completely cooled
down. Otherwise, it could damage other items.
■ Clean the hair dryer as described in the section "Cleaning".
■ For storage purposes, you can hang the hairdryer up by the suspension
loop
■ Store the hair dryer at a dustfree and dry location.

Troubleshooting

Should your hair dryer not function as expected, first remove the plug from the
mains power socket and allow the appliance to cool down for a few minutes.
The appliance is fitted with an overheating protector!
Should the appliance still not function, consult the service department detailed
under "Service".
SHAC 2100 A1
WARNING - RISK OF FIRE!
click back onto the recesses on the hairdryer. Turn the
clockwise a little way so that it clicks into place and sits
.
at regular intervals with a soft brush.
a little way anticlockwise so that it can be removed
with a soft brush.
back onto the hairdryer so that the tabs on the
│ 35 ■
GB