Cleaning The Housing; Cleaning The Air Suction Grill; Storage; Troubleshooting - SilverCrest SHC 2000 A1 Mode D'emploi

Cleaning the housing

■ Use a soft cloth lightly moistened with a mild soap solution to clean the housing
and attachments.

Cleaning the air suction grill

WARNING - RISK OF FIRE!
Clean the air intake grill 2 at regular intervals with a soft brush.
►
1) Turn the air intake grill 2 a little way anticlockwise so that it can be removed
from the hair dryer.
2) Clean the openings of the air intake grill 2 with a soft brush.
3) Push the air intake grille 2 back onto the hairdryer so that the tabs on the
air intake grille 2 click back onto the recesses on the hairdryer. Turn the
air intake grille 2 clockwise a little way so that it clicks into place and sits
tightly.

Storage

CAUTION - PROPERTY DAMAGE!
► First pack and transport the hair dryer when it has completely cooled
down. Otherwise, it could damage other items.
■ Clean the hair dryer as described in the section "Cleaning".
■ For storage purposes, you can hang the hairdryer up by the suspension
loop 3.
■ Store the hair dryer at a dustfree and dry location.

Troubleshooting

Should your hair dryer not function as expected, first remove the plug from the
mains power socket and allow the appliance to cool down for a few minutes.
The appliance is fitted with an overheating protector!
Should the appliance still not function, consult the service department detailed
under "Service".
SHC 2000 A1 GB │ IE │ 9 ■