Control Board - England's Stove Works 25-CBPAH Guide D'installation Et D'utilisation

Control Board
The Control Board (Part # PU‐CB19) is a digital read‐out board. This board offers a wide variety
of settings to operate the unit. The right side panel should be removed prior to removing the control
5
board, using a / " wrench or nut driver. The control board can be removed from the unit by
16
loosening the two outside screws and pulling the board back to the inside of the stove. A 6‐amp
"quick‐blow" fuse is used on this Control Board.
NOTE: The bottom three control buttons are preset at the factory and are not user adjustable. See
the "Daily Operation" section on page 18 of the manual for more instructions on Control
Board settings.
Low Burn:
Medium Low:
Medium High:
High Burn:
* NOTE: Blower Speed will automatically be adjusted to the desired Heat Range that you select.
IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING CLEANING THE UNIT AS SPECIFIED, AND
ENGLAND'S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR DUE TO UNSAFE INSTALLATION OR
REPLACING COMPONENTS
Recommended Heat Ranges:
Heat Range setting: 1
Heat Range setting: 2 – 3
Heat Range setting: 4 – 8
Heat Range setting: 9
REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.
USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH ANY QUESTIONS.
Room Air Blower setting: 1
Room Air Blower setting: *
Room Air Blower setting: *
Room Air Blower setting: 9
40