Using a utility type vacuum cleaner, vacuum the fly ash out of the exhaust chamber. A
short piece of hose can be attached to the end of the utility vacuum line and can be
useful in reaching the ash. Replace the clean‐out port covers when finished.
A specially designed ash vacuum is available from the England's Stove Works website;
please see: store.heatredefined.com .
NOTE: As with any maintenance concerning this unit, be sure the unit is "OFF," has
completed the Shut‐Down cycle, and is completely cool BEFORE beginning.
Be aware that metal parts in the firebox can remain HOT long after the fire has gone out
and EVEN after the Shut‐Down cycle is complete. Always use extreme caution when
handling potentially hot stove parts, even if you think they should be cold.
Monthly maintenance should include the steps listed in this section AS WELL AS the
steps listed in the "Daily Maintenance" and "Weekly Maintenance" section.
Intervals between monthly cleanings will depend on the duration that the stove is
burning on a daily basis. A stove which is operated continuously will need more
frequent monthly cleanings than a stove which is used periodically as supplemental
heat.
A good rule of thumb for monthly maintenance is that it should be done each time an
entire ton of pellets is burned OR once per month, whichever comes first.
If excess ash accumulation is found in the exhaust chamber or venting system during
monthly maintenance, the interval between cleanings should be reduced to eliminate
the possibility of poor stove performance due to ash accumulation.
A specially designed ash vacuum is available from the England's Stove Works website;
please see: store.heatredefined.com
IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING CLEANING THE UNIT AS SPECIFIED, AND
ENGLAND'S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR DUE TO UNSAFE INSTALLATION OR
MONTHLY MAINTENANCE
(Continued next page)
REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.
USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH ANY QUESTIONS.
26