CHARGE THE EARBUDS
1. Place the earbuds on the charging base until they magnetically snap into place.
NOTES:
• Make sure you place the correct earbud on the correct side of the charging base.
Look for the L (left) and R (right) markings on the inside surface of each earbud.
The earbuds will only charge if placed on the correct sides.
• When correctly placed, the earhooks point in the opposite direction of the
USB cable.
2. Connect the USB cable to a wall charger (not provided).
CAUTION: Use this product only with an agency-approved power supply that
meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).
While charging, the earbud status lights blink white. When the battery is fully
charged, the status lights glow solid white (see page 24).
NOTE: For the best battery performance, keep the earbuds on the charging base
when not in use. Make sure the charging base is connected to power.
BAT T ERY
L
|
2 2
E N G
R