Connecting Wires To Terminals - Kenwood KDC-205 Mode D'emploi

Connecting Wires to Terminals

If no connections are made, do not let the wire come out from the tab.
6 Connect either to the power control terminal
when using the optional power amplifier, or to
the antenna control terminal in the vehicle.
Ignition key
switch
10
Car fuse box
(Main fuse)
11
–
+
Battery 12
P.CONT
Not Used9
ANT.
CONT.
Do not let the wire come
out from the tab. 4b
Not Used9
TEL MUTE
Do not let the wire come
out from the tab. 4b
ACC 13
Car fuse
box 14
Ground wire (Black) · (To car chassis)
4
Fuse (10A)
Power control/Motor antenna
control wire (Blue/White)
16
Ignition wire (Red) 20
Battery wire (Yellow) 21
22
— 14 —
Rear left output (White)
Rear right output (Red)
REAR
L
FM/AM antenna input
R
Wiring harness
(Accessory1)25
29
White/Black
To front left
speaker 30
FRONT • L
White
31
32
Gray/Black
To front right
speaker 33
FRONT • R
Gray
34
35
Green/Black
To rear left
speaker 36
REAR • L
Green
37
38
Purple/Black
To rear right
speaker 39
REAR • R
Purple
40
23
28
1