Alarm Function; Switching Off The Warning Signal; Door Alarm; Vacation Mode - Gaggenau RC 462 Guide D'utilisation Et D'entretien

Alarm function

Switching off the warning signal

.
Press the alarm button

Door alarm

The door alarm switches on if an appliance door is left open
for longer than three minutes.
Close the door to switch off the warning signal.

Vacation Mode

If you are away for a prolonged period, you can switch the
appliance to an energetically more favorable mode. When
Vacation mode is active,
– the appliance switches to Eco function (see section
on "Energy-saving mode"),
– the interior light switches off,
– the Fast cooling function ends (if switched on).
To switch on Vacation mode:

Press the VACATION button
The symbol is displayed. Instead of the required
VACATION
temperature, the presetting temperature is displayed.
To end Vacation mode, press the VACATION button
The previous settings and temperature values are used
again.
All manuals and user guides at all-guides.com
to switch off the warning signal.
$
.
$

Rest mode

When Rest mode is switched on, the following settings
are switched off:
– Fast cooling (if switched on)
– Accoustic signal
– Interior light
– Messages in the display field
– The background illumination of the fascia is reduced.
– Buttons are locked.
To switch on Rest mode:

Press and hold down the FAST COOLING button

Press the VACATION button

Hold down the FAST COOLING button
3 seconds.
The
VACATION
.
The background light on the display goes out.
SABBATH is displayed.
To end Rest mode, press the VACATION button
The previous settings and temperature values are used
again.
$
.
3
symbol flashes on the display.
3
.
for a further
$
.
17