Controls; Switching The Appliance On; Operating Tips; Setting The Temperature - Gaggenau RF 287 Mode D'emploi

Masquer les pouces Voir aussi pour RF 287:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Controls

1
Alarm button
Used to switch off the warning signal, see
chapter "Alarm function".
2
"Fast" button – freezer compartment
Switches fast freezing on and off.
3
Temperature selection button
The required temperature is set with this button.
4
Temperature display
Indicates the set temperature of the freezer
compartment.

Switching the appliance on

Switch on the appliance with the main On/Off
switch 5 (see appliance overview).
A warning signal sounds. The temperature display 4
flashes and the super display 1 is lit up, until
the appliance has reached the set temperatures.
Press the alarm button 1. The warning signal switches
off.
When the freezer compartment has reached the set
temperature, the temperature display 4 is lit.
The appliance starts to cool, the light is switched on
when the door is open.

Operating tips

After the appliance has been switched on, it may
take several hours until the set temperature has
been reached. Do not put any food
in the appliance beforehand.
The fully automatic NoFrost system ensures that
the freezer compartment remains free of ice.
Defrosting is not required.
The sides of the housing are sometimes heated
slightly. This prevents condensation in the area
of the door seal.
If the freezer compartment door cannot be
immediately re-opened after it has been closed,
wait until the resulting low pressure has
equalised.

Setting the temperature

Freezer compartment

The temperature can be set from -16 °C to -24 °C.
Keep pressing temperature setting button 3 until
the required freezer compartment temperature is set.
The value last selected is saved. The set temperature
is indicated on temperature display 4.

Alarm function

The warning signal switches on if the freezer
compartment is too warm.
Switching off the warning signal
Press the alarm button 1 to switch off the warning
signal. The display is reset to standby.

Door alarm

The door alarm (continuous sound) switches on if the
appliance door is open for longer than one minute.
Close the door to switch off the warning signal.
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rf 247

Table des Matières