Safety Considerations; Technical Data - Dustcontrol DC 5800c 9.2 kW P Manuel D'instruction

Masquer les pouces Voir aussi pour DC 5800c 9.2 kW P:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Safety Considerations

Read all instructions before attempting to operate this
machine and save these instructions.
Warning! When using electric machines, basic safety
precuations should always be
the risk of fi re, electric shock and personal injury,
including the following:
1. Work area environment
Don´t expose the machine for rain. Don´t use
it in damp or wet locations or in presence of
fl ammable liquids or gases.
2. Overload
Never let the machine operate fully throttled.
Always follow the regulations pertinent to the
material you are working with ie asbestos.
Don´t use the machine for purposes that it isn´t
intended for.
3. Body injuries
Never let the suction come in contact with
parts of the body. The strong suction effect can
hurt the blood-vessels in the skin. Do not re-
pair the electric components yourself, get
somebody qualifi ed. Faults may cause injury.
See also below under warnings.
4. Don´t abuse cord
Never pull the machine by cord. Keep cord
from heat and sharp edges. Check the electric

TECHNICAL DATA

HxWxL
Weight
Inlet
Collecting sack 50 l
Hose length (φ 50)
Flow, max
Neg. pressure, max
Power consumption
Fine fi lter polyester, area
Degree of separation
(DIN 24184/3)
Filter area, microfi lter
Degree of separation,
microfi lter (DOP)
Sound level */
Sound eff ect level
followed to reduce
1800x760x1150 mm
ca 210 kg
φ 108 mm
kPa
40
700 x 850 mm
5-50 m
3
800 m
/h
28 kPa
20
9.2 kW
2
8.4 m
99.9 %
2
5 m
> 99,97 %
< 75 dB(A)
93 db
DC 5800c 9,2 kW P - 8
cable regularly if damage.
5. Important measure
With cleaning and maintenance on the mach-
ine, the power cable should be disconnected
from the supply.
6. Maintain the machine with care
Keep machine clean and check that the hose
is entired and that all gaskets are tight. Follow
instructions. Keep handles dry and free from
oil and grease.
7. Checking of damage
Before futher use of the machine it should
be carefully checked that the machine is un-
damaged. If there are any damaged parts these
should be repaired by of a Dustcontrol authori-
zed service center.
8. Warning
Use only accessories and replacable parts
which are available in Dustcontrol catalogue.
When using faulty parts or pirate parts
(especially fi lter) the machine could leak out
unhealthy dust which can cause personal
injuries.
Vacuum producer capacity
9,2 kW P
200
400
600
*/ Sound level at 1.6 m height and 1 m distance
according to DIN 45635 Section 1 (4/84) in free
space and at maximum airfl ow.
3
800
m
/h
1000
Part No 9092

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

9092

Table des Matières