Safety Considerations; Technical Data - Dustcontrol DC 2700i Manuel D'instruction

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Safety Considerations

Read all instructions before attempting to operate this
machine and save these instructions.
Warning! When using electric machines, basic safety
precuations should always be
the risk of fi re, electric shock and personal injury,
including the following:
1. Work area environment
Don´t expose the machine for rain. Don´t use
it in damp or wet locations or in presence of
fl ammable liquids or gases.
2. Overload
Never let the machine operate fully throttled.
Always follow the regulations pertinent to the
material you are working with ie asbestos.
Don´t use the machine for purposes that it isn´t
intended for.
3. Body injuries
Never let the suction come in contact with
parts of the body. The strong suction effect can
hurt the blood-vessels in the skin. Do not re-
pair the electric components yourself, get
somebody qualifi ed. Faults may cause injury.
See also below under warnings.

TECHNICAL DATA

HxBxL
Weight
Inlet
Collection in container
Hose length rek. max.
Flow, max
Neg. pressure, max
Power consumption
Fine fi lter polyester, area
Degree of separation
(DIN 24184/3)
Soundlevel */
*/ Sound level at 1,6 m height and 1 m distance according to
DIN 45635 Section 1 (4/84) in free space and at maximum airfl ow.
followed to reduce
1060x480x625 mm
19 kg
X 50 mm
30 l
5 m, φ 38 mm
190 m
3
/h
21 kPa
1200 W
1.5 m
2
99.9 %
< 70 dB(A)
DC 2700i - 8
4. Don´t abuse cord
Never pull the machine by cord. Keep cord
from heat and sharp edges. Check the electric
cable regularly if damage.
5. Important measure
With cleaning and maintenance on the mach-
ine, the power cable should be disconnected
from the supply.
6. Maintain the machine with care
Keep machine clean and check that the hose
is entired and that all gaskets are tight. Follow
instructions. Keep handles dry and free from
oil and grease.
7. Checking of damage
Before futher use of the machine it should be
carefully checked that the machine is un-
damaged. If there are any damaged parts these
should be repaired by of a Dustcontrol authori-
zed service center.
8. Warning
Use only accessories and replacable parts
which are available in Dustcontrol catalogue.
When using faulty parts or pirate parts
(especially fi lter) the machine could leak out
unhealthy dust which can cause personal
injuries.
Vacuum producer capacity
kPa
20
10
50
100
150
200
m
3
/h
Art nr 9424

Publicité

Table des Matières
loading

Table des Matières