Storage; Cleaning And Care; Warranty; Disposal - Gazzini 10013450 Mode D'emploi

4. The strut (7) can either be inserted into the universal joint (5) or omitted depending on the given
constructional conditions.
5. Connect the universal joint (5) and strut (7) using the flat-head bolt (6) and gently tighten it with
a hexagon key (size 4).
6. Now insert the strut with the ball head and cap nut (9) into the upper section of the strut (7) and
connect both sections using the flat-head bolt (8). Gently tighten the bolt with a hexagon key
(size 4).
7. Then fasten the base plate for the sat nav (10) using the cap nut of the strut (9).
8. Now align the sat nav mounting bracket to suit your own requirements and tighten the bolt
connections. Tighten the lock nut (3) against the clamp (1) with an open-ended wrench (size 15)
and the flat-head bolts (6 + 8) with a hexagon key (size 4). Only tighten the cap nut under the
base plate (10) finger-tight.
9. Now fasten the corresponding adapter for the respective sat nav or sat nav case to the base
plate.
10. If necessary, align the sat nav mounting bracket again as described.

5 | Storage

Until it is installed, the gazzini Sat Nav Mounting Bracket should be kept in its original packaging
and stored in a place that is protected against weather and moisture. The air humidity should not
exceed 80%.

6 | Cleaning and care

Use warm soapy water or motorcycle cleaner and a soft cloth to clean the gazzini Sat Nav Mounting
Bracket. Do not under any circumstances use cleaners which may corrode aluminium. Finally, apply
polishing wax to seal the surface and protect it from the weather.

7 | Warranty

This product comes with the statutory two-year warranty. The warranty period begins on the date of
purchase. It does not cover normal wear and tear, use for anything other than the intended purpose,
or damage caused by an accident, tampering or attempted repairs by unauthorised persons or
customer service departments.

8 | Disposal

Dispose of packaging material and the product itself in accordance with applicable local
regulations.

9 | Contact

If you have any questions about the product and/or these instructions, before using the product for
the first time, please contact our Technical Centre by e-mail at: service@louis.eu. We will help you
as quickly as possible. This is the best way to ensure that the product is used correctly.
Made in Taiwan
13