What's Included; General Information; Reading And Keeping The Instructions For Use - Gazzini 10013450 Mode D'emploi

ARTICLE NAME

1 | What's included

Art. no. 10013450 (for metric handlebars)
Art. no. 10013451 (for double-butted handlebars)
6
5
4
3
2
1
Handlebar clamp Ø 22.2 mm
1
(metric) or Ø 28.6 mm
(double-butted) - depending
on design
Cheese head screw with
2
hexagon socket head
DIN 6912 M5 x 16 A2
Lock nut M10 x 1.0
3

2 | General information

2.1 | Reading and keeping the instructions for use

These instructions for use apply exclusively to the aforementioned gazzini Sat Nav Mounting
Bracket. They contain important information on installation, safety and the warranty. Read these
instructions carefully, in particular the safety instructions, before installing the sat nav mounting
bracket. Failure to follow the instructions can result in damage to the sat nav mounting bracket itself
or to your vehicle, make it less safe to ride on the road, and possibly cause subsequent damage.
Keep these instructions for future reference. If you pass the sat nav mounting bracket on to a third
party, you must also hand over these instructions.
The instructions for use are based on the standards and regulations applicable in the European
Union and reflect current state-of-the-art technology. If abroad, you should also observe any country-
specific guidelines and laws.
10
7
Threaded pin M10 x 1.0 / M6
4
Universal joint
5
Flat-head bolt with hexagon
6
socket head ISO 7380
M6 x 12 A2
Strut, hole spacing
7
85 mm
8 10
9
Flat-head bolt with hexagon
8
socket head ISO 7380
M6 x 12 A2
Strut with ball head and
9
cap nut
Base plate for sat nav or
10
sat nav case