Williams-Sonoma Beefer Notice D'utilisation page 9

5 SET-UP:
Proceed as follows:
1. Carefully remove the Beefer from the package. Store the packaging.
ATTENTION: Damaging hazard. Never carry the Beefer from the back, on the
control knob for gas feed, on the ignition button or gas connection
for the LPG bottle.
2. Carry the Beefer on the short sides. Ask for help from a second person if the
Beefer is too heavy for you.
3. Carefully carry the Beefer to where you would like to set it up.
4. Carefully set the Beefer at the desired place in order to not damage the
ceramic burner plate.
If you would like to transport the Beefer to another place after use,
note the instructions in Chapter 12, Care, Transport and Storage.
The handling, storage and transportation of all sizes of LPG bottles must be in
accordance with Storage and Handling of Liquid Petroleum Gases, NFPA 58 or
Natural Gas and Propane Installation Code, CSA B149.1.
9