Williams-Sonoma Beefer Notice D'utilisation page 15

11 PROBLEMS AND SOLUTIONS:
PROBLEM POSSIBLE
CAUSE
the flame cannot LPG bottle still closed
be ignited
LPG bottle empty
gas lines or pressure regulator
are not continuous, not tightly
connected, kinked or pinched
control knob for gas feed
not in the high position
intake tract
from insects
ceramic burner plate
the appliance is
burning, but too
little
appliance goes
out during
operation
blocked, such as
nozzle dirty
ceramic burner plate
deposits
ceramic burner plate
broken, such as through
improper transport
intake tract blocked,
such as by insects
LPG bottle empty
the grilled item has touched
the temperature sensor
ASSISTANCE
open the valve on the LPG bottle
replace the LPG bottle
ensure that the installation is
correct; if necessary, replace the
pressure regulator or gas lines
is move the control knob for
gas feed
position, then press it down
clean the intake tract
wet
press a dry cloth carefully under
the ceramic burner plate
clean the nozzle
has fat allow the appliance to burn
without grilled items at
maximum level for about 15
minutes.
is
contact your Beefer dealer
clean the intake tract
replace the LPG bottle
place the grilled item on the
grate so that it does not touch
the temperature sensor
reignite the appliance
to the high
and
15