Switch The Device Ready; Operating The Keys; Switching On The Hob And Cooking Zones; Switching Off A Cooking Zone - Kuppersbusch EKID9940.0 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 42
Operation
Suitable for induction cooking

Switch the device ready

With the Standby key
, the unit is switched operational. The key is like
the main switch. After switching off using this button the unit remains about
10 min. in standby mode. First there is a self-test of the controls and then the
indicators light up briefly.
After switching off using this button the unit remains about 10 min. in standby
mode.
Attention! If the device is switched off completely, no more residual heat is
displayed!

Operating the keys

The controls described here expect the pressing of a (selection) key to be
followed by the pressing of a subsequent key.
The next key will need to be pressed within 10 seconds, otherwise the
selection will be deleted.

Switching on the hob and cooking zones

1. Press the ON/OFF key hob
appears and a short signal will sound.
The controls are ready for operation.
2. The touch control
immediately afterwards. A power setting will be switched on.
........ left...........................power level 0
........ center......................power level 6
........ right.........................power level P *
See the section on Worth knowing about the slider (touch control).
Press the respective touch control
or to switch on an additional cooking zone.
3. Immediately put cookware suitable for induction cooking onto the
cooking zone. The pan recognition device will activate the induction coil.
The pot or pan will be heated up.
As long as no cooking pot is placed onto the cooking zone, the display
will alternate between the power level set and the symbol
If no pot is placed on the cooking zone it will switch off after 10 minutes
for reasons of safety. Please refer to the Section on pan recognition.

Switching off a cooking zone

4. a) Press the touch control
b) Drag your finger to the left across the touch control
reduce the power setting to 0
c) Press the ON/OFF key hob
the cooking zones are switched off).

Switching off the hob

5. Press the ON/OFF key hob
irrespective of any settings.
Please note:
The hob will switch off automatically after 10 seconds when all the cooking
zones are switched of manually (power setting 0) and no key/touch control is
pressed afterwards.
* The Power boost function is activated immediately. Refer to Section "Power
boost function".
(approx. 1 sec.) until the power setting 0
of a cooking zone must be activated
to change a power setting
on the far left or
. The entire hob will be switched off (all
. The hob will be completely switched off,
GB
.
to
29

Publicité

Table des Matières
loading

Table des Matières