Special Functions - Briteq BTX 5R BEAM Mode D'emploi

ENGLISH OPERATION MANUAL
Gobo (Reset GOBO)
Select Gobo, press ENTER button to confirm, use UP and DOWN buttons to select Yes (the unit will run
built-in program to reset GOBO wheel to their home positions) or No, press ENTER button to store. Press
MENU button to exit.
Zoom /Frost/Focus (Reset Zoom /Frost/Focus)
Select Zoom /Frost/Focus, press ENTER button to confirm, use UP and DOWN buttons to select Yes (the
unit will run built-in program to reset zoom, frost and frost to their home positions) or No, and press ENTER
button to store. Press MENU button to exit.
All (Reset All)
Select All, press ENTER button to confirm, use UP and DOWN buttons to select Yes (the unit will run built-in
program to reset all motors to their home positions) or No, press ENTER button to store. Press MENU button
to exit.

Special Functions

Enter menu mode, select Special Functions, press ENTER button to confirm, use UP and DOWN buttons
to select Fixture Maintenance or Factory Setting.
Fixture Maintenance
Select Fixture Maintenance, press ENTER button to confirm, use UP and DOWN buttons to select Interval
or Remain Time.
Interval
Select Interval, press ENTER button to confirm, the interval time will show on the display. Press MENU
button to exit.
Remain Time
Select Remain Time, press ENTER button to confirm, the remaining time will show on the display, press
ENTER button to confirm, use UP and DOWN buttons to select Exit or Reset time, press MENU button to
exit.
Factory Setting
Select Factory Setting, press ENTER button to confirm, the fixture will reset to factory settings and exit
menu mode.
Home Position Adjustment
Press MENU button into menu mode, then press ENTER button for about 3 seconds into offset mode to
adjust the home position. Select the function by ENTER button. Use UP and DOWN button to choose the
submenu, press the ENTER button to store and automatically return to the last menu. Press MENU button to
exit.
BRITEQ 12/95 BTX-BEAM 5R
®