Adjusting The Needle Drop Position; Adjusting The Stitch Length - Janome Marie OsmondQC Manuel D'instructions

Janome Marie Osmond Instruction Manual
q
0.0 3.5
1.0
www.toews.com
Straight stitch in left needle position
q Pattern:
e
w Presser foot:
e Thread tension: AUTO
w
Use this stitch to seam the fabrics along the edge.

Adjusting the needle drop position

The needle drop position of the straight stitch patterns,
#04, #05, #27, #36-#43, #46, #48-51can be changed by
pressing the stitch width adjustment button.
Press the right side of the button (+ sign) to move the
needle bar to the right.
Press the left side of the button (– sign) to move the needle
bar to the left.
7.0

Adjusting the stitch length

The stitch length can be altered by pressing the stitch
length adjustment button.
The stitch length indication will change as the button is
pressed.
Press the right side of the button (+ sign) to increase the
stitch length.
Press the left side of the button (– sign) to decrease the
5.0
stitch length.
56
Janome Sewing Machine
#4 (mode 1)
Zigzag foot A
Marie Osmond Owners Manual/ User Guide