emerio PH-122042 Mode D'emploi page 9

5. Connect your heater and your mobile phone at the same WI-FI Internet.
1) Make sure the blue Wi-Fi indicator light is blinking rapidly.
a) Click "Add Device" to enter into the next screen. Select "Add Manually", and then choose the correct
product category (Small Home Appliance → Heater), then come into the next screen, click "Confirm
indicator rapidly blink".
b) Type in the Internet password (the network name has already been filled in for you) and confirm. The
connection begins.
2) If the "rapid blink" connection is failed, long press button "M" to get slow blink, then try again.
a) Click "Add Device" to enter into the next screen. Select "Add Manually", and then choose the correct
product category (Small Home Appliance → Heater), then come into the next screen; choose "AP
Mode", come to the next screen and click "Confirm indicator slowly blink".
b) Type in the Internet password (the network name has already been filled in for you) and confirm.
c) You will get the hint "connect your mobile phone to the device's hotspot", click "Go to Connect", you
will come to WLAN settings, choose "SmartLife-XXXX". Return to the APP. The connection will begin.
- 8 -