emerio PH-122042 Mode D'emploi page 6

PH-122042
PARTS DESCRIPTION
1. Heater body
2. Temperature sensor
3. Power switch
4. Control panel
5. Feet
a) LED display
b) Standby button
c) Timer and WIFI button
d) Value increase / decrease buttons
e) WI-FI indicator light
f) Timer indicator light
FEET ASSEMBLY (FREE STANDING)
1. Place the free standing feet on the ground. Insert the appliance into the slots of the feet.
2. Screw firmly with the two bolts.
WALL MOUNTING
There is a pack of accessories provided with the appliance. Please use it for wall mounting according to below
illustrations.
- 5 -
EN