emerio PH-122042 Mode D'emploi page 12

If you want to turn off the schedule, touch icon "
If you want to cancel the schedule, long touch that schedule selection. Then the "Delete" screen will come;
touch "Confirm" to delete the schedule. (Fig. D)
If your heater fails to operate, please follow these instructions:

Ensure that your circuit breaker or fuse is working properly.

Be sure the heater is plugged in and that the electrical outlet is working properly.

If the power switch is not illuminated, send it to a service center for reparation directly.
SAFETY SYSTEM
The appliance has a safety system which automatically switches the unit off when overheated.
CLEANING THE HEATER
Always un-plug the heater from the wall socket and allow it to cool down completely before cleaning. Clean the
outside of the heater by wiping with a damp cloth and with a dry cloth. Do not use any detergents or abrasives
and do not allow any water to penetrate the heater.
To release the appliance from the wall, just open the screw bolt caps and unscrew the bolts to take off from the
wall.
STORING THE HEATER
When the heater is not used for long time it should be protected from dust and stored in a clean dry place.
TECHNICAL DATA:
Operating voltage: 220-240V ~ 50/60Hz
Power consumption: 425W
Max. transmitting power: 15.1 dBm
Frequency range: 2412MHz – 2472MHz
Declaration of Conformity (DOC)
We, Emerio FOB Limited, declare under our sole responsibility that the product: PH-122042 is in conformity
with the essential requirements and other relevant requirements of the RED Directive (2014/53/EU)
The complete CE declaration is available at the following address: www.emerio.eu
". This row of schedule will get grey. (Fig. C)
- 11 -