Specifications; Assembly And Set Up; Assembly - MW TOOLS CAT030S Mode D'emploi

CAT030S - NLFREN - v1.0 - 28082017
EN

2 Specifications

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
Model
manual including all text under subheadings therein before set up or use of this product.
Capacity
Working pressure
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
Air consumption
manual including all text under subheadings therein before set up or use of this product.
Hose length
Note: For additional information regarding the parts listed in the following pages,
Air inlet
refer to the Assembly Diagram near the end of this manual.
Net weight

Assembly

3 Assembly and set up

WARNING!
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
Read the entire important safety information section at the beginning of this manual before set up
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
or use of this product.
manual including all text under subheadings therein before set up or use of this product.
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
3.1 Assembly
refer to the Assembly Diagram near the end of this manual.
Note: For additional information regarding the parts listed in the following pages, refer to the spare parts diagram in chapter
Assembly
6 of this manual.
Step1:
assemble#16,#15,#14
Step1:
assemble#16,#15,#14
Step1:
Step 1
Step1:
Assemble #16, #15, #14 assemble#16,#15,#14
assemble#16,#15,#14
Step 4
Step 4:
Attach handle (2) to the
Attached handle(2) to the
tank (1) with screw (3).
tank(1) with screw(3)
Step 4:
Attached handle(2) to the
tank(1) with screw(3)
CAT030S
26 l
6 bar / 90 psi
240 l/min @ 8 bar
2 m
G 1/4''
13 kg
Step 2:
assemble #21/#22
Step 2
Assemble #21, #22
Step 2:
Step 2:
assemble #21/#22
assemble #21/#22
5X8 air hose
Step 5:
attach air hose to media regulator(23),
andthen attach mediaregulator(23) to tank(1)
5X8 air hose
5X8 air hose
Step 3:
Attach Air Regulator (4) to the
Tank (1) with
Attach Bracket using the two
Socket Head Screws(8) and
Step 2:
wrench tighten.
assemble #21/#22
Attach air hose(10) to the Tank (1)
compression nut
withseal(11) and compression nut(12).
air hose
Step 2:
Step 3:
Step 3:
assemble #21/#22
Attach Air Regulator (4) to the
Attach Air Regulator (4) to the
Tank (1) with
media regulator
Tank (1) with
Attach Bracket using the two
Attach Bracket using the two
Socket Head Screws(8) and
Socket Head Screws(8) and
wrench tighten.
wrench tighten.
Attach air hose(10) to the Tank (1)
media regulator
Attach air hose(10) to the Tank (1)
withseal(11) and compression nut(12).
withseal(11) and compression nut(12).
5X8 air hose
media regulator
media regulator
media regulator
Step 5:
25
attach air hose to media regulator(23),
6
andthen attach mediaregulator(23) to tank(1)
Air Regulator
compression nut
air hose
compression nut
air hose
Air Regulator
Air Regulator
Step 3:
Attach Air Regulator (4) to the
compression nut
Tank (1) with
compression nut
air hose
Attach Bracket using the two
air hose
Socket Head Screws(8) and
wrench tighten.
Attach air hose(10) to the Tank (1)
Step 3
withseal(11) and compression nut(12).
Attach air regulator (4) to the tank (1) with
the bracket. Attach the bracket using the two
Step 3: socket head screws (8) and wrench tighten.
Attach Air Regulator (4) to the Attach air hose (10) to the tank (1) with seal
Tank (1) with (11) and compression nut (12).
Attach Bracket using the two
Socket Head Screws(8) and
wrench tighten.
Attach air hose(10) to the Tank (1)
withseal(11) and compression nut(12).
Step 5
Attach air hose to media regulator (23), and then
attach media regulator (23) to tank (1).
TOOLS
Air Regulator
Air Regulator