Truma AquaGo Serie Mode D'emploi page 11

• Never operate the electric antifreeze kit
without an installed plug in the flue duct.
(The plug prevents cold air from flowing
through the heat exchanger).
5. Remove the plug from the holder and close
the flue duct with it (see Figure 6).
6. You may have to connect the connection
cable to the adapter cable (see Figure 5).
Flue duct
Plug
Lug
Fig. 6
7. To operate the antifreeze kit, fill the
Truma AquaGo™ instant water heater with
water and switch it on. (See "Winter oper-
ation" in the operating instructions for the
Truma AquaGo™ instant water heater.)
• Close open bypass lines (if present).
11