Operating Elements And Connections; Applications - IMG STAGELINE LED-4MC Mode D'emploi

All operating elements and connections described
can be found on page 2.

1 Operating Elements and Connections

1 DMX signal output (3-pole XLR) to connect the
RGB LED spotlights to be controlled;
pin configuration: 1 = ground, 2 = DMX-, 3 = DMX+
2 Selector switch for the number of spotlights
3 Low voltage jack DC IN 12V with latching to con-
nect the plug-in power supply unit provided
4 ON/OFF switch
5 Button DIMMER to set the total brightness; the cur-
rent setting will be indicated via the three LEDs
"50 %", "75 %" and "100 %"
6 Button TRANSITION to select the change of
scenes in the sequence mode; the current setting
will be indicated via the two LEDs
"HARD" = sudden change
"SOFT" = transition
7 Button PTN to select a sequence pattern in the
sequence mode
8 Button MODE to select the operating mode
static colours: LED "SCENE" will light up
sequence mode: LED "SCENE" will not light up
9 Microphone for the music-controlled sequence
mode
10 Button TAP to switch between time-controlled and
music-controlled sequence mode
11 Button COL to select the colour or colour combina-
tion in the static mode and in the sequence mode
12 Button B / O with indicating LED for blackout of all
spotlights; to return to the previous mode, press the
button once again
13 Button STROBE with indicating LED "ON" to acti-
vate the stroboscope function of the spotlight; to
return to the previous mode, press the button once
again
2 Safety Notes
The units (controller and power supply unit) corre-
spond to all required directives of the EU and are
therefore marked with
WARNING The power supply unit uses dangerous
mains voltage. Leave servicing to
skilled personnel only. Inexpert han-
dling or modification of the unit may
result in electric shock.
Please observe the following items in any case:
G
The units are suitable for indoor use only. Protect
them against dripping water and splash water, high
air humidity and heat (admissible ambient tempera-
ture range 0 – 40 °C).
G
Do not operate the controller and immediately dis-
connect the power supply unit from the socket
1. if the controller or the power supply unit is visibly
damaged,
2. if a defect might have occurred after a unit was
dropped or suffered a similar accident,
3. if malfunctions occur.
In any case the units must be repaired by skilled per-
sonnel.
G
For cleaning only use a dry, soft cloth; never use
water or chemicals.
G
No guarantee claims for the units and no liability for
any resulting personal damage or material damage
will be accepted if the units are used for other pur-
poses than originally intended, if they are not cor-
rectly connected or operated, or if they are not
repaired in an expert way.
If the units are to be put out of operation
definitively, take them to a local recycling
plant for a disposal which will not be harmful
to the environment.

3 Applications

LED-4MC has been designed for easy control of RGB
LED spotlights. It is capable of controlling the models
PARL-1RGB/... and PARL-10RGB/... and further spot-
lights with the following configuration of DMX channels:
.
GB
7