Key To Symbols; Symbols On The Machine; Symbols In The Operator's Manual - Husqvarna 439 Manuel D'utilisation

Symbols on the machine:

WARNING! Chain saws can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to
the operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the
machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in the Technical data chapter
and on the label.
Chain brake, activated (right)
Chain brake, not activated
(left)
Choke lever in "open position".
Choke lever in "closed position".
Air purge.
Refuelling.
Chain oil fill.
Adjustment of the oil pump.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
2 – English

KEY TO SYMBOLS

Symbols in the operator's
manual:
Switch off the engine by moving the
stop switch to the STOP position
before carrying out any checks or
maintenance. CAUTION! The start/
stop switch automatically returns to
run position. In order to prevent
unintentional starting, the spark plug
cap must be removed from the spark
plug when assembling, checking
and/or performing maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged when
the chain saw is started.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar up
and towards the operator. May cause
serious personal injury.