Introduction; What's In The Box; Studiophile Dx4 Features - M-Audio Studiophile DX4 Mode D'emploi

Introduction

Thank you for choosing the Studiophile DX4 professional desktop audio monitoring
system. Top recording engineers and producers in studios around the world use
M-Audio's Studiophile Series monitors. With the Studiophile DX4s, you can enjoy the
same professional standard of audio quality right on your desktop.
The Studiophile DX4 has been designed and tested by veteran audio engineers to
meet your needs in a desktop audio monitoring environment. It is focused on the
functional goal of delivering pure, original sound without any additional coloration. The
DX4 monitor is self-powered, directly accepting a line level signal from a variety of
sources.
The Studiophile DX4 is designed to overcome all the limitations of conventional
desktop monitors within the digital audio environment. The DX4s match a custom
tuned cabinet design, optimized drivers and an advanced crossover technology with
plenty of power, insuring the highest-fidelity sound available from audio monitors of
their size. And M-Audio's proprietary Opt
improved and defined stereo imaging. Studiophile DX4s bring your computer-based
music, games and DVDs to life.

What's in the Box?

Your Studiophile DX4 box contains:
Two DX4 speakers (Left and Right)
One speaker wire
One 1/8 inch mini jack to RCA audio cable
One detachable AC power cord
User Manual
Actual test results of the DX4s you purchased

Studiophile DX4 Features

Woofer - The woofer unit is 4 inches in diameter with a magnetically shielded,
curved cone, high-temperature voice coil and closed cell foam damping. It is
designed to deliver balanced mid- and low- frequency response. The design is
used to react against the input signals accurately and to deliver even minimal
input precisely while minimizing distortion.
Tweeter - By employing a specially developed 1-inch mylar dome with magnetic
shielding, the tweeter can deliver distortion-free original sound and offer an
extremely natural response. It minimizes reaction time by using the specially
shaped mylar dome for excellent delivery, and also minimizes resonance by
adapting a unique internal damping technology. Also, incorporated into the
tweeter is the OptImage wave guide technology that improves stereo imaging.
Sub-Frequency Port - The hole in the rear panel is called a Sub-Frequency Port
and is designed to discharge extreme low frequencies.
Image wave guide technology assures
•
3