Electrical Connection - Gazzini 10035332 Instructions De Montage Et Mode D'emploi

necessary, appropriate extensions (accessories) can be
installed. Ensure that your turn signals are installed in a clearly
visible position and are not obscured by other parts such as
luggage racks, bags or saddlebags. After dismantling the
original turn signals, larger openings in the vehicle's fairing are
often found, depending on the model, which are not completely
covered by the new turn signals. In such a case, check whether
model-specific turn signal holder covers (accessories) are
available for the vehicle so that the problem can be solved in a
visually appealing way.

ELECTRICAL CONNECTION::

LED turn signals only light up if the positive cable (+) and
the negative cable (-) are connected correctly. For marking
purposes, there are small flags on the cable. If these small flags
are not in place, hold the cable to the battery briefly in order to
determine the correct polarity prior to the actual connection.
To make the electrical connection particularly simple, there are
specific adapter cables (accessories) available for a wide range
of vehicles. On one side, the adapter cables have a compact
connector that fits into the plug-in connector of the original
wiring harness and, on the other, the necessary connections
to connect the accessory turn signal. In this way, no further
materials whatsoever are required for creating the electrical
connections. If a connection with adapter cables is not possible
or desired, separately available Japanese plugs can be used.
18
Turn signal mount covers
reduce tinkering time
Adapter cables leave the wiring
harness intact