Champion RANGE AND TARGET WHEELYBIRD 2.0 Mode D'emploi page 25

Features and Descriptions
Wireless Receiver
A) Remote Learn Button
• Initiates pairing (programming) of Receiver
and Wireless Remote Transmitter.
B) Remote Learn Light
• Flashes slowly to indicate the Receiver
is ready to learn the Wireless Remote
Transmitter.
• Flashes rapidly three times when Receiver
has learned the Wireless Remote Transmitter
to confirm the signal has been received.
C) Receiver Status Light
• When Receiver status LED is green the
Receiver is powered on and will accept a
signal from the remote.
• As soon as a signal is received the status
light will turn red until the trap fires.
• Once trap fires the light will turn back to
green.
D) Removable Antenna
• Antenna must be attached for proper
operation.
E) Throw Delay
• Adjusts length of delay (range 0-15 seconds)
for trap to fire after Receiver receives a
signal from the Wireless Remote Transmitter.
F) 12V Power Connector and Output Connector
• Allows user to quickly and easily attach
Receiver to the trap.
Wireless Remote Transmitter
G) Transmitter Button (Throw Button)
• Pressing this button will transmit the command
to activate the output to any Receiver which has
learned the Wireless Remote Transmitter and is
within range of the Transmitter.
H) Signal Light
• Illuminates when signal is being transmitted.
I) Battery Compartment Cover
• Remove to install/replace the A23 Battery.
F
I
25
D
B A C
H
G
E