(B) Elevation Adjustment
WARNING: BEFORE MAKING ANY ADJUSTMENTS, MAKE SURE THE THROWING
ARM IS IN THE UNCOCKED POSITION, THE ON/OFF/SAFE RELEASE SWITCH IS
IN THE "OFF" POSITION, AND THE BATTERY IS DISCONNECTED FROM THE
TRAP. DO NOT MANUALLY FORCE THE THROWING ARM THROUGH THE
UNCOCKED POSITION AS THE MAIN SPRING WILL TAKE OVER AND FIRE THE
TRAP, POTENTIALLY CAUSING SERIOUS INJURY OR DEATH.
1. To adjust the elevation, slightly loosen the four bolts (two on each side of the trap).
2. Change the elevation by grasping the trap main body and pivoting the trap to the
desired position.
3. Re-tighten the four bolts to secure the trap in the new position.
Loosen Bolts and
Adjust Elevation
18