(C) Assembly; Assemble Frame - Champion RANGE AND TARGET WHEELYBIRD 2.0 Mode D'emploi

(C) Assembly

CAUTION: PROVIDE AMPLE CLEARANCE AROUND THE TRAP.
DO NOT OPERATE THE TRAP IN AN AREA THAT DOES NOT ALLOW SAFE (REAR)
ACCESS TO THE TRAP AND THE ON/OFF/SAFE RELEASE SWITCH DURING
LOADING AND USE.

Assemble Frame

1. Assemble Axle (F1) and Bracket Support Bar (F2) to Mounting Bracket (F10) using 8mm
x 45mm Bolt (F4), 8mm x 16mm bolt (F5) with 8mm Washers (F6) and 8mm Lock Nut
(F7).
2. Attach Handle (F3) to Bracket Support Bar (F2) using 8mm x 45mm Bolt (F4) with 8mm
Washers (F6) and 8mm Lock Nut (F7). Handle end (F3) can point straight back or to one
side.
3. Assemble Wheel (F8) to each end of Axle (F1). Install Axle Clip (F9) in groove on each
end of Axle.
F3
F4
F8
F9
F3
F10
F2
F4
F5
10
F1
F6
F7
F8