Adjustments; (A) Throwing Arm Limit Switch - Champion RANGE AND TARGET WHEELYBIRD 2.0 Mode D'emploi

(A) Throwing Arm Limit Switch

WARNING: BEFORE MAKING ANY ADJUSTMENTS, MAKE SURE THE THROWING
ARM IS IN THE UNCOCKED POSITION, THE ON/OFF/SAFE RELEASE SWITCH IS
IN THE "OFF" POSITION, AND THE BATTERY IS DISCONNECTED FROM THE
TRAP! DO NOT MANUALLY FORCE THE THROWING ARM THROUGH THE
UNCOCKED POSITION AS THE MAIN SPRING WILL TAKE OVER AND FIRE THE
TRAP, POTENTIALLY CAUSING SERIOUS INJURY OR DEATH.
The machine is set at the factory. Only make adjustments to the limit switch if a target
doesn't drop onto the throwing arm as the throwing arm is cocking, or the throwing arm
continuously fires. TEST MACHINE FIRST WITHOUT ANY TARGETS.
The limit switch controls the stop position of the throwing arm during the traps cocking cycle.
The limit switch is located under the trap near the front. The front cover can be removed to
gain easier access to the switch. Replace cover after adjusting switch.
VI. Adjustments
Front Cover
Limit Switch
16