Measurement Display; Note On Guest Mode - boso Medicus PC2 Mode D'emploi

Measurement display

As soon as the unit registers the first beats,
the symbol blinks in time with the pulse
rhythm and an acoustic signal can be
heard.
The end of the measurement is indicated
by a long beeping sound.At the same time,
the built-in solenoid valve opens automa-
tically to rapidly release the remaining
pressure in the cuff.
Illustration 8
58
Systole
mmHg
Diastole
mmHg
Pulse/min.
The measured blood pressure values
(systole, diastole, pulse) are displayed (see
illustration 8).
The measurement is stored automatically
(except for guest mode, see below). If the
memory store is full (325 measurements),
the oldest measurement is deleted and
the current one stored.

Note on guest mode:

If a measurement value is not be kept,
press „M" while the measured values are
still on display.
Invalid measurements with an "Err" mess-
age (see page 64) are not stored.