Setting The Time And Date - boso Medicus PC2 Mode D'emploi

Starting up
The monitor has a battery status display
(see P. 40)
Flashing! No further
measurements possible.
Replace battery.
Change batteries only when the
monitor is switched off!
The time and date settings remain in me-
mory if the time taken to replace the batte-
ries does not exceed 30 seconds. In order
to avoid possible problems of consistency
on transmission of the readings, please
check that the time and date are correctly
set each time the batteries have been re-
placed.
Care for the environment
Do not dispose of used batteries and
charger units in domestic waste.
You can take these to collection sites for
used batteries or special waste.
Contact your local authority for informa-
tion.

Setting the time and date

Your boso medicus PC2 unit is equipped
with an internal time and date function.
To set the time and date, press the SET
button in the manner described
below:
47