Measurement Display - boso Medicus Vital Mode D'emploi

Measurement display

After the end of the measurement, the in-
built valve opens automatically and the
cuff deflates rapidly.
The measured blood pressure values
(systole, diastole, pulse) are displayed (see
EN
illustration 7).
Illustration 7
64
The measurement is stored automatically.
If the memory store is full (60 measure-
ments), the oldest measurement is dele-
ted and the current one stored.
Invalid measurements with an "Err" mess-
age (see page 70) are not stored.
If the symbol
urement, it is recommended that the
Systole
measurement is repeated, holding the
mmHg
arm completely still. If the
appears again even with the arm held still,
this may be an indication of an irregular
Diastole
heartbeat. Please discuss this with your
mmHg
doctor at your next visit.
Pulse/min.
appears after the meas-
symbol