Quick Guide - boso Medicus PC2 Mode D'emploi

Quick guide

➡ Insert batteries, ensure correct position-
ing (P. 46)
➡ Connect cuff to monitor (P. 51)
➡ Attach cuff (P. 53)
➡ Start (and stop) a measurement by
pressing the START/STOP button (P. 56)
Measured systolic, diastolic and pulse
values are displayed after the measure-
ment is completed (P. 58)
➡ Retrieving values from memory (P. 60):
with the instrument switched off, press
the START/STOP button until "M" is
displayed.
Now all the stored measurement rea-
dings are shown successively for three
seconds.
This quick guide does not replace the
detailed information on the use and
safety of the blood pressure monitor fea-
tured in the user instructions.
Please be sure therefore to read
the user instructions!
41