Installation Instructions - Presto 18725 Notice D'installation

ENGLISH

1) INSTALLATION INSTRUCTIONS

2) Control through partition (CATC)
3) PRECAUTIONS FOR USE (The product guarantee depends on the respect for these rules)
INSTALLATION and START UP
For products delivered with filters, these must be installed in accordance with the instructions.
Before commissioning any of our valves, it is essential to carefully drain
the pipes that can damage the mechanisms or water passages (PRESTO® heads that can be dismantled from front).
Recommended operating pressure according to NF EN 816: 1 to 5 bars.
CLEANING
The chrome-plated coating of PRESTO® valves must be cleaned only with soapy water.
Abrasive, acid, alkaline or ammonia-based household products are prohibited.
4) Standard installation
5) Optional drilling
6) Optional pin installation
7) Tightening
8) Special installation P1000 XL THROUGH PARTITION
9) 8 max
10) Part number
11) Partition thickness
12) Drawing
13) ECLAIR THROUGH PARTITION FLUSHING KIT
14) P1000 XL THROUGH PARTITION KIT
15) THROUGH PARTITION URINAL SIPHON ACTION KIT
16) THROUGH PARTITION SHORT SPOUT WASHBASIN KIT
17) THROUGH PARTITION LONG SPOUT WASHBASIN KIT
18) THROUGH PARTITION ORDINARY URINAL KIT
19) THROUGH PARTITION SHOWER PRESTO 50 KIT
20) THROUGH PARTITION SHOWER PRESTO 500 S KIT
21) This document is not contractual; we reserve the right to modify the characteristics of our products
without notice.
22) PATENTED and REGISTERED MODELS