Accessories; Machine Packaging; Preliminary Operations - Saeco Xsmall Steam Mode D'emploi

22
Key to Machine Components
Coffee bean hopper lid
Coffee bean hopper
Service door
Dregdrawer
Dispensing spout
Cup warming surface
Full drip tray indicator
Drip tray
Water tank
Hot water/steam wand
Protective handle
Control panel
Brew group
Control Panel
Small coffee brew button
Large coffee brew button
ON/OFF button
Control dial.
Warning light
Temperature light
Double coffee light

Accessories

Grinder adjustment key
Power cord
Brew group lubricant
Pannarello (standard on the Plus model only)
KEY TO MACHINE COMPONENTS - INSTALLATION
4 INSTALLATION
For your safety and the safety of others, carefully
follow the "Safety Regulations" in section 3.
4.1

Machine Packaging

The original packaging has been designed and
constructed to protect the machine during transport.
We recommend keeping the packaging material for
possible future transport.
4.2

Preliminary Operations

• Remove the coffee bean hopper lid (1) and the drip
tray (8) with grill (6) from the packaging.
• Remove the coffee machine from the packaging and
position it in a place that meets the requirements
described in the safety regulations (section 3).
• (Fig. 15) - Place the drip tray (8) with grill (6) into its
appropriate seat on the machine.
• Place the lid (1) on the coffee bean hopper (2).
• Before plugging the machine into the socket, be
sure that all steps outlined in section 4.3 have been
completed.
Important note: Carefully read the explana-
tions of all the warnings displayed by the
machine to the user by means of the lights on the
control panel (section 12).
Never remove the drip tray when the machine
is turned on. To remove the drip tray from the
machine, turn the machine off. The machine will carry
out a rinse/self-cleaning cycle (see section 4.4) when
it is turned off. When this cycle is fi nished, the drip
tray may be removed.
4.3 Using the Machine for the First Time
• (Fig. 3) - Remove the water tank (9).
• (Fig. 4) - Fill the tank with fresh drinking water up to
the MAX level. Re-insert the tank.
Use only fresh, non-sparkling water to fi ll the
tank (9). Hot water or any other liquid may
damage the tank and/or the machine. Do not turn
on the machine when the tank is empty. Make sure
there is enough water in the tank.
• (Fig. 1) - Remove the lid (1) from the coffee bean
hopper (2).