Télécharger Imprimer la page

Intellichlor Electronic Chlorine Generator Overview; Features - Pentair INTELLICHLOR IC15 Installation Et Guide D'utilisation

Masquer les pouces Voir aussi pour INTELLICHLOR IC15:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 87
IntelliChlor
®
Electronic Chlorine Generator Overview
The IntelliChlor Electronic Chlorine Generator (IECG) salt chlorinator uses a process known as electrolysis to
produce chlorine gas which immediately dissolves into a solution to create Hypochlorite and Hypochlorous acid
pool and spa water sanitizer from a low concentration of salt added to the pool water. Hypochlorite and
Hypochlorous kill bacteria, oxidizes organic material, and kills algae, then reverts back to salt. The IECG then
reuses the salt and the process starts over again. The IntelliChlor system is comprised of the IECG and Power
Center.
owner's responsibility for monitoring and maintaining free chlorine levels at the APSP recommended range of
2.0 to 4.0 parts per million (ppm). It is the pool owner's responsibility to check, on a regular basis, the free
chlorine level while the pool pump is running, and adjust the IntelliChlor Electronic Chlorine Generator
accordingly.
to sea water and other salt solutions, placing any amount of salt in your pool increases the likelihood of
corrosion or other deterioration of pool equipment and any surfaces used in and around your pool. Metal parts
(including steel pools) and certain natural and man-made surfaces are particularly susceptible to corrosion and
deterioration when used in and around salt water pools. Pentair
otherwise guarantee that the proper use of the IntelliChlor Electronic Chlorine Generator will prevent
corrosion or other deterioration of pool equipment and any surfaces used in and around your pool. Consult your
experienced pool professional, who should be able to advise you on the proper material selection, installation
techniques for those materials, and the proper use, care and maintenance of those materials for your specific
pool type and location in order to minimize the corrosion and deterioration that is inherent in and around salt
water pools.
operate the IECG with newly poured or resurfaced pool plaster. Salt is a corrosive
element and severe salt damage can occur to your pool. Wait at least ONE (1) MONTH after construction
to allow plaster to cure before adding salt and operating IECG. Follow the pool surface manufacturer's
guidelines for your specific pool.
FOR NEW VINYL LINER POOLS, contact the manufacturer for recommended guidelines before adding
salt and operating the IECG.

Features

Superior design combines cell and control panel as one assembly.
Cell blades are made from a titanium metal base and coated with precious metal Ruthenium oxide.
Cell blades are capable of producing chlorine for at least 10,000 hours, when the IECG is used properly.
The IECG can be installed horizontally or vertically.
Separate Power Center mounts to wall at equipment pad, for easy AC wiring.
Electronics run cool for long, reliable life.
Cell hour meter reports current usage to determine how many hours remain in the life of the unit.
IC40 model produces up to 1.40 lbs. per day, the IC20 model produces up to 0.70 lbs per day and the
IC15 produces up to 0.60 lbs. of chlorine per day.
Head Loss of the IECG system installed into the main line is less than 1 psi.
Salt level LED indicators show three ranges for the amount of salt in pool.
Red and green LED indicators show system status for water flow, cell status and cold water.
MORE and LESS output buttons control how much chlorine is produced.
BOOST cycle sets the unit to maximum chlorine output for 24 hours of pump run time.
UL listed to UL1081 standards for swimming pool chlorinators.
Approved NSF regulatory standards, and CE certified.
The IntelliChlor Electronic Chlorine Generator (IECG) is designed only to produce chlorine.
The IECG does not monitor or control chlorine levels in the pool or spa water. It is the pool
Salt is an inherently corrosive material. While the levels of salt required for proper
operation of the IntelliChlor Electronic Chlorine Generator are relatively low when compared
FOR ALL NEWLY CONSTRUCTED OR RESURFACED PLASTER POOLS: Do not
IntelliChlor Electronic Chlorine Generator Installation and User's Guide
does not
1

Publicité

loading

Ce manuel est également adapté pour:

Intellichlor ic20Intellichlor ic40