Installation Requirements; Tools Needed; Location Requirements - Maytag MYR20 Instructions D'installation

Tools needed

Specifications
1/2" Drive
1/2" Drive
15/16" (23.8 mm)
1/2" Drive
T-27
†
-
24"
Parts supplied MYR20, MYR25, MYR30:
Qty. Part number
4 WFR154349
4 WFR153016
4 WFR153015
Parts supplied MYR40, MYR55, MYR65:
Qty. Part number
8 WFR154349
8 WFR153016
8 WFR153015

Location Requirements

The floor under the washer must be capable of supporting the substantial static and dynamic forces created by the weight of the washer
and the spinning of an out of balance load.
See the washer installation instructions for details on the flooring requirements for your washer model.
IMPORTANT: The use of a steel washer Pedestal does not alter the cement foundation requirements for mounting the washer as listed
in the washer installation manual.
† TORX and T-27 are registered trademarks of Acument Intellectual Properties, LLC.
4

INSTALLATION REQUIREMENTS

Torque wrench (Capable of 100 ft-lbs (136 Nm))
Extension (9" or longer)
Security Torx
Lifting device capable of lifting the washer 6" off the floor
Specification
5/8"-11 x 1-7/8"
5/8"
5/8"
Specification
5/8"-11 x 1-7/8"
5/8"
5/8"
Description
Ratchet
Socket
Screwdriver
†
Level
Description
TAP BOLT
FLAT WASHER ZINC
SPLIT LOCK WASHER ZINC
Description
TAP BOLT
FLAT WASHER ZINC
SPLIT LOCK WASHER ZINC
Image
Image
Image