Supplement; Technical Data - Balluff BMD 1H Serie Notice D'utilisation

11 Supplement

11.1 Technical data

General data
316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
Process seal on the instrument side
(rod leadthrough)
Process seal
Rod: ø 8 mm (0.315 in) - polished
Surface quality
1)
Polished (Basel Standard)
Electropolished (Basel Standard)
Materials, non-wetted parts
Stainless steel housing (electropol-
ished)
Seal between housing and housing lid Silicone SI 850 R
Inspection window in housing cover
(optional)
Ground terminal
Cable gland
Sealing, cable gland
Blind plug, cable gland
Conductive connection
Clamp
Slotted nut
Weight
Instrument weight (depending on
Rod: ø 8 mm (0.315 in) - polished
Probe length L (from seal surface)
Rod: ø 8 mm (0.315 in) - polished
Trimming accuracy - rod
Lateral load with rod: ø 8 mm (0.315 in)
- polished
Torque for exchangeable rod probe (in
Torque for NPT cable glands and Conduit tubes
Stainless steel housing
All wetted parts
1)
316L and PEEK
DM 291), FEPM (Vi 602 Extreme-ETP, Messrs. COG)
On site
316L (only 1.4435) - according to Basle Standard
R < 0.76 μm (3 in)
-5
a
R < 0.38 μm (1.5 in)
-5
a
316L
Polycarbonate (with Ex d version: glass)
316L
PA, stainless steel, brass
NBR
PA
from 2"
from DN 32 PN 40
approx. 0.8 ... 8 kg (0.176 ... 17.64 lbs)
up to 4 m (13.12 ft) - also possible for segmented rods
±1 mm + 0.05 % of the rod length
10 Nm (7.38 lbf ft)
max. 4.5 Nm (3.32 lbf ft)
max. 50 Nm (36.88 lbf ft)
11 Supplement
-
63