Functional Description; Technical Data; Before Use - Hilti XBT 4000-A Mode D'emploi

4. Functional description

The XBT 4000-A is a cordless drill for professional use.
For maximum efficiency and comfort, we recommend
using the pistol grip to hold the tool in line with the fore-
arm . The motor cooling air is drawn in though the
en
slits and expelled from the outlet. The drill is suitable for
left- and right-handed use. Its nonslip rubber-padded
grip reduces fatigue.
The following items are supplied in a cardboard box:
– Drill with chuck
– Operating Instructions

5. Technical data

XBT 4000-A drill
Rated voltage
Chuck capacity
Torque
Speed
Speed control
Dimensions (L×W×H)
Weight including battery and chuck
Gearing section sealed to prevent ingress of dust and permanently lubricated to avoid the need for maintenance
Battery SFB 185
Rated voltage
Capacity
Weight
Temperature monitoring
Type of cell
Number of cells
Specifications are subject to change without notice

6. Before use

A new battery must be charged correctly for the first
time before use:
– charged normally for 24 hours with the SFC 7/8 H,
C7/24 charger, or
– charged for 12 hours using the conditioning function
of the SFC 7/18 or TCU 7/36 charger. This will ensure
that the cells form correctly. Incorrect initial charging
may have a permanent, negative effect on battery capa-
city.
4
Printed: 07.07.2013 | Doc-Nr: PUB / 5071409 / 000 / 00
See figure and the explanations of operating controls
and components on page 1.
Main features of the tool
– Vibration-absorbing grip (synthetic rubber)
– Smooth speed control
– Gearing with permanent lubrication
– Automatic cut-out carbon brushes
– Scaffold hook and belt hook
(pivoting and removable)
– Lockbutton for sustained operation
– Cooling air guidance (air exit)
18 V DC –––
- - -
5 mm/0.19" (main applications 4 mm/0.16" dia.)
< 6 Nm / < 4.43 ft-lb
0–4000 r.p.m.
Electronic, using ON/OFF switch
250×69×265 mm / 9.84×2.72×10.43 in
2.4 kg / 5.29 lb
18 V DC –––
- - -
18 V × 3.0 Ah = 54 Wh
1.15 kg / 2.54 lb
yes
SCB C nickel metal hydride
15
-WARNING-
– The tool may be used only with SFB 185 batteries.
– Battery performance drops at low temperatures.
– Batteries should be stored at room temperature. Never
store batteries where they are exposed to the heat of
the sun, on a radiator, behind a motor vehicle wind-
screen or at a window.
– Never use the battery until the cells become fully dis-
charged. Change to the second battery as soon as a
drop in performance is noticed and recharge the bat-
tery immediately so that it is ready for re-use.
– Use TX-BT 4/7-80 /110 / 150 step drill bits only.
Since it cannot be charged via the belt adapter, to charge
the battery insert it directly into the charger.